[. . . ] KDC-X798 KDC-BT758HD KDC-BT710HD CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] On on Reject an incoming call End a call Switch between hands-free and private talk modes Adjust the phone volume Press or B SRC (or press RC-406). Text message notification When the phone receives a text message, the unit rings and “SMS RECEIVED” appears. Phone volume: [00] to [35] (Default: [15]) • This adjustment will not affect the volume of the other sources. The connected phone (which has been paired the earliest) is activated. However, if priority device is connected, pressing and holding activate the priority device. ( 17, DVC PRIORITY) 2 Speak the name of the contact you want to call or the voice command to control the phone functions. € This unit also supports the intelligent personal assistant function of iPhone. 2 Turn the volume knob to make a selection (see the following table), then press the knob. VOICE Speak the name of the contact you want to call or use the voice command to control the phone functions. (  15, Use Voice Recognition) LOW/ MID/ FULL: Shows the strength of the battery. NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current received signal. Default: XX 1 — 30: The unit answer incoming call automatically in the selected time. SYSTEM: The unit rings to notify you when a call/text message comes in. ) • CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls. € MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming text messages. PHONE: The unit uses the connected phones’ ring tone to notify you when a call/text message comes in. ) ON: The unit rings and “SMS RECEIVED” appears to notify you of an incoming text message. To return to the previous setting item or hierarchy, press CALL HISTORY 1 Press the volume knob to select a name or a phone number. € “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previous call status. • Press DISP SCRL to change the display category (NUMBER or NAME). € “NO DATA” appears if there is no recorded call history. 2 Turn the volume knob to select a phone number, then press the knob to call. [. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. jVC KENWOOD Corporation 2967-3 , ISHIKAWA-MACHI , HACHIOJI-SHI , TOKYO , JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE. Location : Top Plate FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ]